Open knowledge. Shared progress.Help the exchange grow
The Journal

From the Field

Soil Health ExchangewithAilts Agronomy

Wisconsin field observations and interpretation by Joe Ailts, CCA.

What does a 61-pound bushel of corn really tell you?

Joe Ailts saw high corn test weights and below-average yields in western Wisconsin this fall. What happened after pollination helps explain how a bushel can weigh more even when an acre produces less.

SD
By Saurav Das||Updated |7 min read|26 reads
Print / Save PDF
Two cupped hands hold yellow shelled corn kernels.
A handful of corn kernels photographed for USDA research on the components of grain. — Credit: Stephen Ausmus / USDA Agricultural Research Service

This fall, Joe Ailts sent me a reading from his grain tester. His corn tested at 61.0 pounds per bushel with 14.8% moisture. The reading fit a pattern Joe described in his October 2026 Agronomy Update. Across western Wisconsin, test weights were running high even as yields came in below average. How can a bushel weigh more in a season when the fields produce less grain? ⁠[1]

A Dickey-john grain analyzer screen reads 14.8% moisture, 61.0 lbs/bu and 76.4 F
Click to expand
Joe’s grain tester reads 61.0 lb/bu at 14.8% moisture. — Photo: Joe Ailts, Ailts Agronomy
A heavier bushel can come from a smaller harvest

Test weight tells you how many pounds of corn fit in a standard volume. Yield tells you how much grain came off an acre.

From a bucket to a bushel

Imagine harvesting two strips of corn the same size. The first fills 10 buckets with 10 pounds of grain apiece, for a total of 100 pounds. From the second strip, each bucket holds 11 pounds of corn, but you fill only eight. You carry heavier buckets back from that strip and end up with 88 pounds of grain.

Interactive figure · Move the sliders

Can heavier buckets add up to less grain?

Two strips of corn, the same size. Strip A filled 10 buckets at 10 lb each. Set what came off Strip B.

11 lb

Works like test weight: one fixed container, weighed full.

8

Every bucket added up is where yield starts.

Strip Astays fixed

100 lb

10 buckets × 10 lb each

Strip Byours to change

88 lb

8 buckets × 11 lb each

Heavier buckets, smaller harvest.

Each Strip B bucket weighs 1 lb more, but the strip filled 2 fewer buckets. That is 88 lb against Strip A’s 100 lb: 12 lb less grain from the same area.

At 11 lb a bucket, Strip B matches Strip A’s 100 lb at 9.1 buckets.

The grain tester works on the same principle as the bucket. A test weight of 61 lb/bu means a standard bushel of volume, about 1.24 cubic feet, holds 61 pounds of that corn. The size, shape, condition and moisture of the kernels affect how tightly they pack. ⁠[2]⁠[3]

A market bushel is how corn is counted when it’s sold or reported as yield. For shelled corn, that’s 56 pounds. To get the market bushels for a load, start with its scale weight, apply the moisture adjustment under the buyer’s terms and divide by 56. ⁠[3]⁠[4]

To measure test weight, a USDA grain inspector lets corn flow from a hopper into a calibrated cup called a kettle. Once the cup overflows, the inspector levels the grain at the rim and weighs it. A scale or conversion table gives the result in pounds per bushel. The cup is filled the same way each time because a shake or a tap can change how the kernels settle. ⁠[2]

Interactive figure · Three steps

Follow the sample through the test

A test-weight reading comes from one fixed cup of grain. Step through how the cup is filled, levelled and weighed.

Step 1 of 3

Fill the kettle

Release a representative sample from the hopper so the calibrated kettle overflows. Let the grain settle as it falls.

Diagram follows the USDA hopper-and-kettle method, drawn as a cutaway. The display uses the test weight in Joe’s newsletter as an example.

What happened after pollination in Wisconsin

Heading into pollination, Joe thought the crop had the best setup he’d seen in his career. The plants had set their kernel rows with little stress, and pollination went smoothly. “Then the water shut off,” he wrote. ⁠[1]

Water stress early in grain fill can cause kernels near the tip of the ear to stop developing. Later in grain fill, stress can limit how much dry matter the surviving kernels put on. Joe suspects some tip kernels were lost and more of the crop’s available starch went to kernels in the middle and at the base of the ear. Fewer kernels can leave less grain to harvest even when the remaining ones fill well. ⁠[1]⁠[6]

Disease pressure stayed low through grain fill. After black layer, when the kernels had finished filling, warm weather and little rewetting helped the crop dry quickly in the field. Near the junction of Polk, St. Croix, Barron and Dunn counties, Joe reported about 2,500 growing degree units from May 1 to October 1, compared with about 2,200 in an average year. ⁠[1]

Joe points to that quick dry-down as a reason for the high test weights. As sound kernels dry, they shrink and can pack more tightly. By Purdue’s estimate, sound corn that tests 52 lb/bu at 25% moisture could reach about 58.9 lb/bu when dried to 15%. Severe stress can leave kernels poorly filled and lower the test weight. ⁠[1]⁠[3]⁠[6]

How test weight and yield compared in Kansas

The two numbers also told different stories in a 2011 Kansas State trial at Scandia, where 60 hybrids grew side by side under irrigation. The corn with the highest test weight, 62 lb/bu, had the lowest yield at 162 bushels per acre. The top-yielding hybrid made 241 bushels per acre and tested at 58 lb/bu. ⁠[8]

Interactive figure · Real trial data

Did the heaviest corn yield the most?

Every dot is one hybrid, grown side by side under irrigation in Kansas in 2011. Pick a test weight to see what those hybrids yielded.

150175200225250Yield, bu/a575859606162Test weight, lb/buTop yield

The heaviest corn was not the best yielder.

At Scandia, the heaviest test weight was 62 lb/bu, and that entry yielded 162 bu/a. The top yield, 241 bu/a, came from corn that tested 58 lb/bu.

At 62 lb/bu: 1 hybrid, 162 bu/a, 47 bu/a below the trial average. Yield gaps under 18 bu/a were within this trial’s margin of error (LSD 0.05).

Source: Kansas State University, 2011 Kansas Performance Tests with Corn Hybrids (SRP1055), Table 3, Scandia, Republic County. Test weight measured at harvest moisture. Maturity-check entries are left out.

Twenty-eight of those hybrids also grew at Manhattan, Kansas. Hybrids with higher test weights at one site tended to test higher at the other, while yields lined up less closely between sites. Purdue agronomist Bob Nielsen found a weak relationship between test weight and yield in Kansas and Ohio trials. ⁠[3]⁠[8]

When choosing hybrids, Joe looks for staygreen, the ability to keep leaves green late in the season. Leaf disease can cut photosynthesis during grain fill and hurt both yield and test weight. ⁠[1]⁠[3]

What test weight means for bin space and grade

Once the grain is in the bin, packing matters. Joe uses two pails to illustrate the idea. Scale that up to two loads of corn and you can see how a difference in test weight changes what fits in a bin. ⁠[1]

Interactive figure · Use your own numbers

Compare corn at 56 and 61 lb/bu

Sample A is 56 lb/bu corn. Set Sample B’s test weight, then hold either the scale weight or the bin space the same for both.

61 lb/bu
lb

Try a scale ticket weight from this harvest.

Sample A56 lb/bu

Scale weight
56,000 lb
Space used
1,000 vol. bu
Market bushels
1,000

Sample B61 lb/bu

Scale weight
56,000 lb
Space used
918 vol. bu
Market bushels
1,000

1,000 market bushels either way

56,000 lb ÷ 56 lb is the same count at any test weight. At 61 lb/bu, Sample B takes about 918 volume bushels of space, 82 fewer than Sample A.

61 lb/bu meets the test-weight minimum for U.S. No. 1 corn (56 lb/bu). Grade also considers kernel damage and broken corn and foreign material, and your buyer’s contract sets any price adjustment.

Illustrative U.S. shelled corn at the same marketing moisture, before discounts and fees. Bin space uses sample test weight as a bulk-density estimate.

Start with two loads that weigh 56,000 pounds each at the buyer’s base moisture. Both contain 1,000 market bushels. The corn that tests at 61 lb/bu takes up about 918 bushels of bin space, while the 56 lb/bu corn takes up 1,000. Now fill a 1,000-bushel bin with each. The 61 lb/bu corn gives you 5,000 more pounds in the same space. ⁠[3]⁠[4]

At the elevator, test weight is one part of the grade. Corn at 61 lb/bu clears the USDA test-weight minimum for both U.S. No. 1 corn (56 lb/bu) and U.S. No. 2 (54 lb/bu). The grade also depends on factors such as kernel damage, broken corn and foreign material. Your buyer’s contract sets any price adjustment for grade or quality. ⁠[3]⁠[5]

How weight and moisture shape your scale ticket

The grade can affect the price per bushel. To figure out how many bushels are on the ticket, start with the load’s weight and moisture. Take a 56,000-pound load that comes in at 20% moisture. It contains 44,800 pounds of dry matter. On a 15.5% moisture basis, that works out to about 53,018 pounds, or 947 market bushels. ⁠[3]⁠[4]

That calculation accounts for the weight of water removed. Purdue’s drying guide reports on-farm handling losses of 0.22% to 1.71%, and the shrink factor in your buyer’s contract may include an allowance for those losses. ⁠[4]

Joe’s sample was already drier than the 15.5% basis in that example. At 14.8% moisture, the same amount of dry matter weighs about 0.8% less than it would at 15.5%. That weight difference is equivalent to about eight market bushels per 1,000. Ask your buyer how they handle deliveries below their base moisture. ⁠[4]

Check the yield monitor against a scale

A reliable scale also gives you a way to check your yield monitor as grain conditions change. In Joe’s experience, a well-calibrated mass-flow monitor usually handles a test-weight change of about 5 lb/bu. He estimates that a monitor calibrated on corn at 23% moisture and 52 lb/bu could read 10% to 15% low on corn at 16% moisture and 61 lb/bu. That’s why he recalibrates during harvest when moisture and test weight change. ⁠[1]

Weigh a calibration load on a reliable grain cart scale, weigh wagon or truck scale and compare it with the monitor reading. Follow the manufacturer’s procedure. If it calls for several loads, run them at different grain flow rates. Check moisture with a separate tester while you’re at it. ⁠[7]

Check your own fields

Pick two fields from this harvest and enter the harvested acres, scale weight, moisture and test weight for each. The calculator puts both yields on a 15.5% moisture basis so you can compare them directly.

Interactive figure · Use your scale tickets

Compare two fields from your scale tickets

Enter two fields or hybrids from this harvest. The figure puts both yields on the same moisture basis and shows whether the heavier corn also yielded more.

Field A
lb
%
ac
lb/bu
Yield at 15.5%
200.1 bu/ac
Test weight
56 lb/bu
Field B
lb
%
ac
lb/bu
Yield at 15.5%
176.4 bu/ac
Test weight
61 lb/bu

Field B had the heavier corn and the lower yield.

At 15.5% moisture, Field A yielded 200.1 bu/ac and Field B 176.4 bu/ac, a gap of 23.6 bu/ac.

Field A’s sample was at 19% moisture. Dried to 15.5%, its 56 lb/bu would be about 58.4 lb/bu. Compare test weights at similar moisture before reading much into the gap.

Field B came in at 14.8%, drier than 15.5%. Its scale weight alone works out to 175 bu/ac, against 176.4 on the 15.5% basis. A buyer who settles on scale weight pays for the lower number.

Yield puts each field’s dry matter on a 15.5% moisture basis, using the water-shrink method in Purdue NCH-61; a buyer’s shrink factor also includes handling loss. The dried test weight uses the estimate in Purdue’s test-weight guide and assumes sound kernels. Example numbers are loaded; Field B uses the 61.0 lb/bu and 14.8% reading from Joe’s tester.

Did the field with the higher test weight also yield more? If the numbers went in different directions, think back to pollination, grain fill and dry-down. If you have ear samples from the same hybrid, compare the number of kernels per ear and the weight of the kernels at similar moisture. That can help you see where the yield difference came from. I’d like to hear what you saw and which numbers came from the same load.

Another question from Joe led to our look at why a cover crop can hold more potassium than your soil test shows.

Keep field ideas coming.

Get the free newsletter: soil health ideas, field answers, and funding opportunities.

SD

Written by

Saurav Das

#Corn#Test Weight#Grain Quality#Yield Monitors#Grain Fill#Wisconsin

Scholarly record

References & Citation

Source material for every claim in this article, plus a citation-ready record for reference managers and scholarly indexes.

Cite this

Reference this work

SHE-ART-2026-0076

Saurav Das (2026). What does a 61-pound bushel of corn really tell you?. Soil Health Exchange. SHE-ART-2026-0076. https://soilhealthexchange.com/cite/SHE-ART-2026-0076

Stable link →

Soil Health Exchange assigns a stable identifier to every published answer and article. Citations keep working even if the URL changes later.

Sources (8)Show sources
Cite this articleShow formats

Cite this article

Citation-ready record

APA

Das, S. (2026). What does a 61-pound bushel of corn really tell you?. Soil Health Exchange. https://soilhealthexchange.com/blog/corn-test-weight-bushel-yield

More citation formats

MLA

Das, Saurav. "What does a 61-pound bushel of corn really tell you?." Soil Health Exchange, 2026-11-14, https://soilhealthexchange.com/blog/corn-test-weight-bushel-yield.

Chicago

Das, Saurav. "What does a 61-pound bushel of corn really tell you?." Soil Health Exchange. Published 2026-11-14. https://soilhealthexchange.com/blog/corn-test-weight-bushel-yield.

Citation metadata is provided for discovery tools and reference managers. Inclusion in external scholarly indexes is not guaranteed.

Discussion

No comments yet. Be the first to share your thoughts!

Continue reading

All articles →